A dental Unit
A necessary work tool of every dental professional consist of specific parts that include the dental chair, stool, lighting, hydric box, aspiration, cuspidor and element
It is the container that is placed next to the dental chair so you can rinse and salivate during the process cuspidor cup is made with porcelain
It is removable and autoclavable, we can add a tap which can be cleaned in a much simpler way
Aspirator is a small tube used to suction the saliva that accumulates in the mouth or small particles of the cavity.
Both the aspiration system and the cuspidor are placed on the left of the chair in the case of right-handed and vice-versa if left-handed.
Uses of water bath
It is used to heat samples maintaining cell lines or heating flammable chemicals that might combust if exposed to open flame
It consist of a heating unit a stainless-steel chamber that holds the water and samples a control interface
The inbuilt anti-corrosion circulating pump can provide circulating constant temperature heat source for glass reactor and rotary evaporator
Type of water bath
A shaking water bath in action
Circulating water baths
Circulating water bath: It keeps a more even temperature, also known as stirrers,
ideal for applications when temperature uniformity and consistency re critical such as enzymatic and serologic experiment.
Water is thoroughly circulated thorough out the bath resulting in a more uniform temperature
Shaking water bath
It has extra control for shaking which moves liquid around, the shaking features can be turned on or off.
In microbiological practices constant shaking allows liquid-grown cell cultures grown cell cultures grown to constantly mix with the air.
The sensor transfer water temperature to resistance value, amplifier and compared by integrated amplifier then output the control signal,
efficiently control the average heating power of electric heating tube and maintain water in constant temperature
When you require balanced high temperature heating that water bath is a good choice.
Operating the water bath
Connect the power supply
Ensure the water level in water bath is sufficient to pour the heating element
Switch ‘on’ the main power supply and instrument mains
For temperature settings press SET key to set the required temperature ↑ to increase the temperature and ↓ to reduce the temperature
The temperature sensor will maintain the set
Principle of heat radiation
When the heater operates, the reflect cover of parabola type radiates evenly the infrared light emitted by the heat source to the baby mattress or the baby’s skin to achieve the purpose of heating.
Operating mode: The infant radiant warmer has a skin temperature mode control temperature system which automatically controls the output of heat radiation according to the temperature detected by the skin temperature sensor.
Radiator: provides infrared radiation for the infant
Tray: for placing low pressure aspirator and nursing articles max weight 2kg
Baby bed: to carry the baby safely max weight is 10kg, it can be tilted according to the need of the care giverKSh270,000.00KSh270,000.00
DHG type electric heating oven drying oven maximum working temperature of 300°C. It is suitable for baking, drying oven heating treatment or other heating, t is also a laboratory standing instrument.
The working temperature of the oven can be raised from room temperature to 30°C to the highest temperature. In this range, the working temperature can be arbitrarily selected After selecting, the temperature can be controlled by the automatic control system.
A Drying oven is designed to remove moisture from the oven chamber so to dry the samples as quickly as possible. The drying oven process introduces fresh dry air to the chamber and expels the warm moist air simultaneously allowing to rapidly dry the samples. A drying oven provides high performance drying and heating. You will notice that drying ovens will be more expensive than a standard laboratory oven mainly due to the oven having drying capability that is lacking in a laboratory oven. A drying oven requires an airflow system that can extract moisture from the air and depending on your requirements, may or may not be required.KSh30,000.00KSh30,000.00
How do you use MUAC
Place the tape measure around the LEFT arm (the arm should be relaxed and hang down the side of the body).
Measure the MUAC while ensuring that the tape neither pinches the arm nor is left loose.
Read the measurement from the window of the tape or from the tape. Record the MUAC to the nearest 0.1 cm or 1mm.
MUAC is measured in adults and children, to the nearest 0.1 cm, using a flexible non stretch tape laid at the midpoint between the acromion and olecranon processes on the shoulder blade and the ulna, respectively, of the arm.
MUAC is a measure of the sum of the muscle and subcutaneous fat in the upper arm.
Why do we measure MUAC
MUAC, is a measurement that allows health workers to quickly determine if a patient is acutely malnourished. PIH, as well as many other organizations, measures the circumference of a patient’s arm at the midpoint between his or her shoulder and elbowKSh200.00KSh200.00