Related products
-
Black Friday, MEDICAL EQUIPMENT
FINGER TIP PULSE OXIMETER
0 out of 5(0)Pulse oximetry is a noninvasive method for monitoring a person’s oxygen saturation. Though its reading of peripheral oxygen saturation (SpO2) is not always identical to the more desirable reading of arterial oxygen saturation (SaO2) from arterial blood gas analysis, the two are correlated well enough that the safe, convenient, noninvasive, inexpensive pulse oximetry method is valuable for measuring oxygen saturation in clinical use.
In its most common (transmissive) application mode, a sensor device is placed on a thin part of the patient’s body, usually a fingertip or earlobe, or in the case of an infant, across a foot. The device passes two wavelengths of light through the body part to a photodetector. It measures the changing absorbance at each of the wavelengths, allowing it to determine the absorbances due to the pulsing arterial blood alone, excluding venous blood, skin, bone, muscle, fat, and (in most cases) nail polish.
Reflectance pulse oximetry is a less common alternative to transmissive pulse oximetry. This method does not require a thin section of the person’s body and is therefore well suited to a universal application such as the feet, forehead, and chest, but it also has some limitations. Vasodilation and pooling of venous blood in the head due to compromised venous return to the heart can cause a combination of arterial and venous pulsations in the forehead region and lead to spurious SpO2 results. Such conditions occur while undergoing anesthesia with endotracheal intubation and mechanical ventilation or in patients in the Trendelenburg position.
SKU: n/aKSh 1,500.00 -
Home Care Equipment, HOSPITAL BEDS, Hospital Furniture, MEDICAL EQUIPMENT
Electric 3 Function Hospital Bed- Kenya
Home Care Equipment, HOSPITAL BEDS, Hospital Furniture, MEDICAL EQUIPMENTElectric 3 Function Hospital Bed- Kenya
0 out of 5(0)It is ideal for home patient use, users are able to adjust the back leg and height adjustment for better comfort. Low in power consumption and only consume when the remote is on.
With three controls, the electrical hospital bed is able to perform the following base function.
- Back raise
- Leg raise
- Height adjustment
SKU: n/aKSh 150,000.00KSh 200,000.00 -
MEDICAL EQUIPMENT
Riester Sphygmomanometer
0 out of 5(0)A sphygmomanometer, also known as a blood pressure monitor, or blood pressure gauge, is a device used to measure blood pressure, composed of an inflatable cuff to collapse and then release the artery under the cuff in a controlled manner,and a mercury manometer to measure the pressure. Manual sphygmomanometers are used with a stethoscope when using the auscultatory technique.
A Riester sphygmomanometer consists of an inflatable cuff, a measuring unit (the mercury manometer, or aneroid gauge), and a mechanism for inflation which may be a manually operated bulb, It uses mercury.
SKU: n/aKSh 5,500.00 -
Black Friday, Christmas Offer, Home Care Equipment, MEDICAL EQUIPMENT
Fetal Doppler-Kenya
0 out of 5(0)How to Use a Fetal Doppler: Steps
- Before you use your doppler, consider that some women report hearing the heartbeat easier in the morning since that’s when the belly is typically the least bloated. Using the doppler while you have a full bladder can also make the heartbeat easier to hear.
- To start, lie with your back down on a flat surface. Expose your abdomen like you would during a regular ultrasound.
- Apply a blob of ultrasound gel or other lubricant to your lower belly. Since the gel will reduce static, use a generous amount.
- Place the doppler probe in the gel and turn the device on.
- Starting from your pubic bone, gently glide the probe upwards towards your belly button. Slowly rock the probe, covering every part of your stomach so that you find the fetus.
- If you hear a heart beat in your earphones and the display shows a heart beat per minute (BPM) of about 120 or higher, you’ve likely found your fetus. Some women say the sound is similar to galloping horses.
- If after a few minutes you cannot find your baby, shut the device off and try another time. You may need to wait for the baby to grow bigger or switch positions.
- After you’re finished, clean off the probe to avoid build up. You may choose to wipe it with 70% ethanol and let air dry or simply wipe it with a clean, dry cloth. Do not submerge the device in water (except waterproof models) or apply cleaning chemicals.
SKU: n/aKSh 10,000.00